 All Implemented Interfaces:
Serializable
,Comparable<Double>
,Constable
,ConstantDesc
Double
class wraps a value of the primitive type
double
in an object. An object of type
Double
contains a single field whose type is
double
.
In addition, this class provides several methods for converting a
double
to a String
and a
String
to a double
, as well as other
constants and methods useful when dealing with a
double
.
This is a valuebased class; programmers should treat instances that are equal as interchangeable and should not use instances for synchronization, or unpredictable behavior may occur. For example, in a future release, synchronization may fail.
Floatingpoint Equality, Equivalence, and Comparison
IEEE 754 floatingpoint values include finite nonzero values, signed zeros (+0.0
and 0.0
), signed infinities
positive infinity and
negative infinity), and
NaN (notanumber).
An equivalence relation on a set of values is a boolean
relation on pairs of values that is reflexive, symmetric, and
transitive. For more discussion of equivalence relations and object
equality, see the Object.equals
specification. An equivalence relation partitions the values it
operates over into sets called equivalence classes. All the
members of the equivalence class are equal to each other under the
relation. An equivalence class may contain only a single member. At
least for some purposes, all the members of an equivalence class
are substitutable for each other. In particular, in a numeric
expression equivalent values can be substituted for one
another without changing the result of the expression, meaning
changing the equivalence class of the result of the expression.
Notably, the builtin ==
operation on floatingpoint
values is not an equivalence relation. Despite not
defining an equivalence relation, the semantics of the IEEE 754
==
operator were deliberately designed to meet other needs
of numerical computation. There are two exceptions where the
properties of an equivalence relation are not satisfied by
==
on floatingpoint values:
 If
v1
andv2
are both NaN, thenv1 == v2
has the valuefalse
. Therefore, for two NaN arguments the reflexive property of an equivalence relation is not satisfied by the==
operator.  If
v1
represents+0.0
whilev2
represents0.0
, or vice versa, thenv1 == v2
has the valuetrue
even though+0.0
and0.0
are distinguishable under various floatingpoint operations. For example,1.0/+0.0
evaluates to positive infinity while1.0/0.0
evaluates to negative infinity and positive infinity and negative infinity are neither equal to each other nor equivalent to each other. Thus, while a signed zero input most commonly determines the sign of a zero result, because of dividing by zero,+0.0
and0.0
may not be substituted for each other in general. The sign of a zero input also has a nonsubstitutable effect on the result of some math library methods.
For ordered comparisons using the builtin comparison operators
(<
, <=
, etc.), NaN values have another anomalous
situation: a NaN is neither less than, nor greater than, nor equal
to any value, including itself. This means the trichotomy of
comparison does not hold.
To provide the appropriate semantics for equals
and
compareTo
methods, those methods cannot simply be wrappers
around ==
or ordered comparison operations. Instead, equals
defines NaN arguments to be equal to each
other and defines +0.0
to not be equal to
0.0
, restoring reflexivity. For comparisons, compareTo
defines a total order where
0.0
is less than +0.0
and where a NaN is equal to itself
and considered greater than positive infinity.
The operational semantics of equals
and
compareTo
are expressed in terms of bitwise converting the floatingpoint values to integral values.
The natural ordering implemented by compareTo
is consistent with equals. That
is, two objects are reported as equal by equals
if and only
if compareTo
on those objects returns zero.
The adjusted behaviors defined for equals
and
compareTo
allow instances of wrapper classes to work properly with
conventional data structures. For example, defining NaN
values to be equals
to one another allows NaN to be used as
an element of a HashSet
or as the key of
a HashMap
. Similarly, defining
compareTo
as a total ordering, including +0.0
,
0.0
, and NaN, allows instances of wrapper classes to be used as
elements of a SortedSet
or as keys of a
SortedMap
.
 See Java Language Specification:

4.2.3 FloatingPoint Types, Formats, and Values
4.2.4. FloatingPoint Operations
15.21.1 Numerical Equality Operators == and !=
15.20.1 Numerical Comparison Operators<
,<=
,>
, and>=
 Since:
 1.0
 See Also:

Field Summary
Modifier and TypeFieldDescriptionstatic final int
The number of bytes used to represent adouble
value.static final int
Maximum exponent a finitedouble
variable may have.static final double
A constant holding the largest positive finite value of typedouble
, (22^{52})·2^{1023}.static final int
Minimum exponent a normalizeddouble
variable may have.static final double
A constant holding the smallest positive normal value of typedouble
, 2^{1022}.static final double
A constant holding the smallest positive nonzero value of typedouble
, 2^{1074}.static final double
A constant holding a NotaNumber (NaN) value of typedouble
.static final double
A constant holding the negative infinity of typedouble
.static final double
A constant holding the positive infinity of typedouble
.static final int
The number of bits used to represent adouble
value.TheClass
instance representing the primitive typedouble
. 
Constructor Summary
ConstructorDescriptionDouble
(double value) Deprecated, for removal: This API element is subject to removal in a future version.It is rarely appropriate to use this constructor.Deprecated, for removal: This API element is subject to removal in a future version.It is rarely appropriate to use this constructor. 
Method Summary
Modifier and TypeMethodDescriptionbyte
Returns the value of thisDouble
as abyte
after a narrowing primitive conversion.static int
compare
(double d1, double d2) Compares the two specifieddouble
values.int
Compares twoDouble
objects numerically.Returns anOptional
containing the nominal descriptor for this instance, which is the instance itself.static long
doubleToLongBits
(double value) Returns a representation of the specified floatingpoint value according to the IEEE 754 floatingpoint "double format" bit layout.static long
doubleToRawLongBits
(double value) Returns a representation of the specified floatingpoint value according to the IEEE 754 floatingpoint "double format" bit layout, preserving NotaNumber (NaN) values.double
Returns thedouble
value of thisDouble
object.boolean
Compares this object against the specified object.float
Returns the value of thisDouble
as afloat
after a narrowing primitive conversion.int
hashCode()
Returns a hash code for thisDouble
object.static int
hashCode
(double value) Returns a hash code for adouble
value; compatible withDouble.hashCode()
.int
intValue()
Returns the value of thisDouble
as anint
after a narrowing primitive conversion.static boolean
isFinite
(double d) Returnstrue
if the argument is a finite floatingpoint value; returnsfalse
otherwise (for NaN and infinity arguments).boolean
Returnstrue
if thisDouble
value is infinitely large in magnitude,false
otherwise.static boolean
isInfinite
(double v) Returnstrue
if the specified number is infinitely large in magnitude,false
otherwise.boolean
isNaN()
Returnstrue
if thisDouble
value is a NotaNumber (NaN),false
otherwise.static boolean
isNaN
(double v) Returnstrue
if the specified number is a NotaNumber (NaN) value,false
otherwise.static double
longBitsToDouble
(long bits) Returns thedouble
value corresponding to a given bit representation.long
Returns the value of thisDouble
as along
after a narrowing primitive conversion.static double
max
(double a, double b) Returns the greater of twodouble
values as if by callingMath.max
.static double
min
(double a, double b) Returns the smaller of twodouble
values as if by callingMath.min
.static double
Returns a newdouble
initialized to the value represented by the specifiedString
, as performed by thevalueOf
method of classDouble
.Resolves this instance as aConstantDesc
, the result of which is the instance itself.short
Returns the value of thisDouble
as ashort
after a narrowing primitive conversion.static double
sum
(double a, double b) Adds twodouble
values together as per the + operator.static String
toHexString
(double d) Returns a hexadecimal string representation of thedouble
argument.toString()
Returns a string representation of thisDouble
object.static String
toString
(double d) Returns a string representation of thedouble
argument.static Double
valueOf
(double d) Returns aDouble
instance representing the specifieddouble
value.static Double
Returns aDouble
object holding thedouble
value represented by the argument strings
.

Field Details

POSITIVE_INFINITY
public static final double POSITIVE_INFINITYA constant holding the positive infinity of typedouble
. It is equal to the value returned byDouble.longBitsToDouble(0x7ff0000000000000L)
. See Also:

NEGATIVE_INFINITY
public static final double NEGATIVE_INFINITYA constant holding the negative infinity of typedouble
. It is equal to the value returned byDouble.longBitsToDouble(0xfff0000000000000L)
. See Also:

NaN
public static final double NaNA constant holding a NotaNumber (NaN) value of typedouble
. It is equivalent to the value returned byDouble.longBitsToDouble(0x7ff8000000000000L)
. See Also:

MAX_VALUE
public static final double MAX_VALUEA constant holding the largest positive finite value of typedouble
, (22^{52})·2^{1023}. It is equal to the hexadecimal floatingpoint literal0x1.fffffffffffffP+1023
and also equal toDouble.longBitsToDouble(0x7fefffffffffffffL)
. See Also:

MIN_NORMAL
public static final double MIN_NORMALA constant holding the smallest positive normal value of typedouble
, 2^{1022}. It is equal to the hexadecimal floatingpoint literal0x1.0p1022
and also equal toDouble.longBitsToDouble(0x0010000000000000L)
. Since:
 1.6
 See Also:

MIN_VALUE
public static final double MIN_VALUEA constant holding the smallest positive nonzero value of typedouble
, 2^{1074}. It is equal to the hexadecimal floatingpoint literal0x0.0000000000001P1022
and also equal toDouble.longBitsToDouble(0x1L)
. See Also:

MAX_EXPONENT
public static final int MAX_EXPONENTMaximum exponent a finitedouble
variable may have. It is equal to the value returned byMath.getExponent(Double.MAX_VALUE)
. Since:
 1.6
 See Also:

MIN_EXPONENT
public static final int MIN_EXPONENTMinimum exponent a normalizeddouble
variable may have. It is equal to the value returned byMath.getExponent(Double.MIN_NORMAL)
. Since:
 1.6
 See Also:

SIZE
public static final int SIZEThe number of bits used to represent adouble
value. Since:
 1.5
 See Also:

BYTES
public static final int BYTESThe number of bytes used to represent adouble
value. Since:
 1.8
 See Also:

TYPE
TheClass
instance representing the primitive typedouble
. Since:
 1.1


Constructor Details

Double
Deprecated, for removal: This API element is subject to removal in a future version.It is rarely appropriate to use this constructor. The static factoryvalueOf(double)
is generally a better choice, as it is likely to yield significantly better space and time performance.Constructs a newly allocatedDouble
object that represents the primitivedouble
argument. Parameters:
value
 the value to be represented by theDouble
.

Double
Deprecated, for removal: This API element is subject to removal in a future version.It is rarely appropriate to use this constructor. UseparseDouble(String)
to convert a string to adouble
primitive, or usevalueOf(String)
to convert a string to aDouble
object.Constructs a newly allocatedDouble
object that represents the floatingpoint value of typedouble
represented by the string. The string is converted to adouble
value as if by thevalueOf
method. Parameters:
s
 a string to be converted to aDouble
. Throws:
NumberFormatException
 if the string does not contain a parsable number.


Method Details

toString
Returns a string representation of thedouble
argument. All characters mentioned below are ASCII characters. If the argument is NaN, the result is the string
"
NaN
".  Otherwise, the result is a string that represents the sign and
magnitude (absolute value) of the argument. If the sign is negative,
the first character of the result is '

' ('\u002D'
); if the sign is positive, no sign character appears in the result. As for the magnitude m: If m is infinity, it is represented by the characters
"Infinity"
; thus, positive infinity produces the result"Infinity"
and negative infinity produces the result"Infinity"
.  If m is zero, it is represented by the characters
"0.0"
; thus, negative zero produces the result"0.0"
and positive zero produces the result"0.0"
.  If m is greater than or equal to 10^{3} but less
than 10^{7}, then it is represented as the integer part of
m, in decimal form with no leading zeroes, followed by
'
.
' ('\u002E'
), followed by one or more decimal digits representing the fractional part of m.  If m is less than 10^{3} or greater than or
equal to 10^{7}, then it is represented in socalled
"computerized scientific notation." Let n be the unique
integer such that 10^{n} ≤ m <
10^{n+1}; then let a be the
mathematically exact quotient of m and
10^{n} so that 1 ≤ a < 10. The
magnitude is then represented as the integer part of a,
as a single decimal digit, followed by '
.
' ('\u002E'
), followed by decimal digits representing the fractional part of a, followed by the letter 'E
' ('\u0045'
), followed by a representation of n as a decimal integer, as produced by the methodInteger.toString(int)
.
 If m is infinity, it is represented by the characters
double
. That is, suppose that x is the exact mathematical value represented by the decimal representation produced by this method for a finite nonzero argument d. Then d must be thedouble
value nearest to x; or if twodouble
values are equally close to x, then d must be one of them and the least significant bit of the significand of d must be0
.To create localized string representations of a floatingpoint value, use subclasses of
NumberFormat
. Parameters:
d
 thedouble
to be converted. Returns:
 a string representation of the argument.
 If the argument is NaN, the result is the string
"

toHexString
Returns a hexadecimal string representation of thedouble
argument. All characters mentioned below are ASCII characters. If the argument is NaN, the result is the string
"
NaN
".  Otherwise, the result is a string that represents the sign
and magnitude of the argument. If the sign is negative, the
first character of the result is '

' ('\u002D'
); if the sign is positive, no sign character appears in the result. As for the magnitude m: If m is infinity, it is represented by the string
"Infinity"
; thus, positive infinity produces the result"Infinity"
and negative infinity produces the result"Infinity"
.  If m is zero, it is represented by the string
"0x0.0p0"
; thus, negative zero produces the result"0x0.0p0"
and positive zero produces the result"0x0.0p0"
.  If m is a
double
value with a normalized representation, substrings are used to represent the significand and exponent fields. The significand is represented by the characters"0x1."
followed by a lowercase hexadecimal representation of the rest of the significand as a fraction. Trailing zeros in the hexadecimal representation are removed unless all the digits are zero, in which case a single zero is used. Next, the exponent is represented by"p"
followed by a decimal string of the unbiased exponent as if produced by a call toInteger.toString
on the exponent value.  If m is a
double
value with a subnormal representation, the significand is represented by the characters"0x0."
followed by a hexadecimal representation of the rest of the significand as a fraction. Trailing zeros in the hexadecimal representation are removed. Next, the exponent is represented by"p1022"
. Note that there must be at least one nonzero digit in a subnormal significand.
 If m is infinity, it is represented by the string
Examples Floatingpoint Value Hexadecimal String 1.0
0x1.0p0
1.0
0x1.0p0
2.0
0x1.0p1
3.0
0x1.8p1
0.5
0x1.0p1
0.25
0x1.0p2
Double.MAX_VALUE
0x1.fffffffffffffp1023
Minimum Normal Value
0x1.0p1022
Maximum Subnormal Value
0x0.fffffffffffffp1022
Double.MIN_VALUE
0x0.0000000000001p1022
 Parameters:
d
 thedouble
to be converted. Returns:
 a hex string representation of the argument.
 Since:
 1.5
 If the argument is NaN, the result is the string
"

valueOf
Returns aDouble
object holding thedouble
value represented by the argument strings
.If
s
isnull
, then aNullPointerException
is thrown.Leading and trailing whitespace characters in
s
are ignored. Whitespace is removed as if by theString.trim()
method; that is, both ASCII space and control characters are removed. The rest ofs
should constitute a FloatValue as described by the lexical syntax rules: FloatValue:
 Sign_{opt}
NaN
 Sign_{opt}
Infinity
 Sign_{opt} FloatingPointLiteral
 Sign_{opt} HexFloatingPointLiteral
 SignedInteger
 HexFloatingPointLiteral:
 HexSignificand BinaryExponent FloatTypeSuffix_{opt}
 HexSignificand:
 HexNumeral
 HexNumeral
.
0x
HexDigits_{opt}.
HexDigits0X
HexDigits_{opt}.
HexDigits
 BinaryExponent:
 BinaryExponentIndicator SignedInteger
 BinaryExponentIndicator:
p
P
s
does not have the form of a FloatValue, then aNumberFormatException
is thrown. Otherwise,s
is regarded as representing an exact decimal value in the usual "computerized scientific notation" or as an exact hexadecimal value; this exact numerical value is then conceptually converted to an "infinitely precise" binary value that is then rounded to typedouble
by the usual roundtonearest rule of IEEE 754 floatingpoint arithmetic, which includes preserving the sign of a zero value. Note that the roundtonearest rule also implies overflow and underflow behaviour; if the exact value ofs
is large enough in magnitude (greater than or equal to (MAX_VALUE
+ulp(MAX_VALUE)
/2), rounding todouble
will result in an infinity and if the exact value ofs
is small enough in magnitude (less than or equal toMIN_VALUE
/2), rounding to float will result in a zero. Finally, after rounding aDouble
object representing thisdouble
value is returned.To interpret localized string representations of a floatingpoint value, use subclasses of
NumberFormat
.Note that trailing format specifiers, specifiers that determine the type of a floatingpoint literal (
1.0f
is afloat
value;1.0d
is adouble
value), do not influence the results of this method. In other words, the numerical value of the input string is converted directly to the target floatingpoint type. The twostep sequence of conversions, string tofloat
followed byfloat
todouble
, is not equivalent to converting a string directly todouble
. For example, thefloat
literal0.1f
is equal to thedouble
value0.10000000149011612
; thefloat
literal0.1f
represents a different numerical value than thedouble
literal0.1
. (The numerical value 0.1 cannot be exactly represented in a binary floatingpoint number.)To avoid calling this method on an invalid string and having a
NumberFormatException
be thrown, the regular expression below can be used to screen the input string:final String Digits = "(\\p{Digit}+)"; final String HexDigits = "(\\p{XDigit}+)"; // an exponent is 'e' or 'E' followed by an optionally // signed decimal integer. final String Exp = "[eE][+]?"+Digits; final String fpRegex = ("[\\x00\\x20]*"+ // Optional leading "whitespace" "[+]?(" + // Optional sign character "NaN" + // "NaN" string "Infinity" + // "Infinity" string // A decimal floatingpoint string representing a finite positive // number without a leading sign has at most five basic pieces: // Digits . Digits ExponentPart FloatTypeSuffix // // Since this method allows integeronly strings as input // in addition to strings of floatingpoint literals, the // two subpatterns below are simplifications of the grammar // productions from section 3.10.2 of // The Java Language Specification. // Digits ._opt Digits_opt ExponentPart_opt FloatTypeSuffix_opt "((("+Digits+"(\\.)?("+Digits+"?)("+Exp+")?)"+ // . Digits ExponentPart_opt FloatTypeSuffix_opt "(\\.("+Digits+")("+Exp+")?)"+ // Hexadecimal strings "((" + // 0[xX] HexDigits ._opt BinaryExponent FloatTypeSuffix_opt "(0[xX]" + HexDigits + "(\\.)?)" + // 0[xX] HexDigits_opt . HexDigits BinaryExponent FloatTypeSuffix_opt "(0[xX]" + HexDigits + "?(\\.)" + HexDigits + ")" + ")[pP][+]?" + Digits + "))" + "[fFdD]?))" + "[\\x00\\x20]*");// Optional trailing "whitespace" if (Pattern.matches(fpRegex, myString)) Double.valueOf(myString); // Will not throw NumberFormatException else { // Perform suitable alternative action }
 Parameters:
s
 the string to be parsed. Returns:
 a
Double
object holding the value represented by theString
argument.  Throws:
NumberFormatException
 if the string does not contain a parsable number.

valueOf
Returns aDouble
instance representing the specifieddouble
value. If a newDouble
instance is not required, this method should generally be used in preference to the constructorDouble(double)
, as this method is likely to yield significantly better space and time performance by caching frequently requested values. Parameters:
d
 a double value. Returns:
 a
Double
instance representingd
.  Since:
 1.5

parseDouble
Returns a newdouble
initialized to the value represented by the specifiedString
, as performed by thevalueOf
method of classDouble
. Parameters:
s
 the string to be parsed. Returns:
 the
double
value represented by the string argument.  Throws:
NullPointerException
 if the string is nullNumberFormatException
 if the string does not contain a parsabledouble
. Since:
 1.2
 See Also:

isNaN
public static boolean isNaN(double v) Returnstrue
if the specified number is a NotaNumber (NaN) value,false
otherwise. Parameters:
v
 the value to be tested. Returns:
true
if the value of the argument is NaN;false
otherwise.

isInfinite
public static boolean isInfinite(double v) Returnstrue
if the specified number is infinitely large in magnitude,false
otherwise. Parameters:
v
 the value to be tested. Returns:
true
if the value of the argument is positive infinity or negative infinity;false
otherwise.

isFinite
public static boolean isFinite(double d) Returnstrue
if the argument is a finite floatingpoint value; returnsfalse
otherwise (for NaN and infinity arguments). Parameters:
d
 thedouble
value to be tested Returns:
true
if the argument is a finite floatingpoint value,false
otherwise. Since:
 1.8

isNaN
public boolean isNaN()Returnstrue
if thisDouble
value is a NotaNumber (NaN),false
otherwise. Returns:
true
if the value represented by this object is NaN;false
otherwise.

isInfinite
public boolean isInfinite()Returnstrue
if thisDouble
value is infinitely large in magnitude,false
otherwise. Returns:
true
if the value represented by this object is positive infinity or negative infinity;false
otherwise.

toString
Returns a string representation of thisDouble
object. The primitivedouble
value represented by this object is converted to a string exactly as if by the methodtoString
of one argument. 
byteValue
public byte byteValue()Returns the value of thisDouble
as abyte
after a narrowing primitive conversion. Overrides:
byteValue
in classNumber
 Returns:
 the
double
value represented by this object converted to typebyte
 See Java Language Specification:

5.1.3 Narrowing Primitive Conversion
 Since:
 1.1

shortValue
public short shortValue()Returns the value of thisDouble
as ashort
after a narrowing primitive conversion. Overrides:
shortValue
in classNumber
 Returns:
 the
double
value represented by this object converted to typeshort
 See Java Language Specification:

5.1.3 Narrowing Primitive Conversion
 Since:
 1.1

intValue
public int intValue()Returns the value of thisDouble
as anint
after a narrowing primitive conversion. Specified by:
intValue
in classNumber
 Returns:
 the
double
value represented by this object converted to typeint
 See Java Language Specification:

5.1.3 Narrowing Primitive Conversion

longValue
public long longValue()Returns the value of thisDouble
as along
after a narrowing primitive conversion. Specified by:
longValue
in classNumber
 Returns:
 the
double
value represented by this object converted to typelong
 See Java Language Specification:

5.1.3 Narrowing Primitive Conversion

floatValue
public float floatValue()Returns the value of thisDouble
as afloat
after a narrowing primitive conversion. Specified by:
floatValue
in classNumber
 Returns:
 the
double
value represented by this object converted to typefloat
 See Java Language Specification:

5.1.3 Narrowing Primitive Conversion
 Since:
 1.0

doubleValue
public double doubleValue()Returns thedouble
value of thisDouble
object. Specified by:
doubleValue
in classNumber
 Returns:
 the
double
value represented by this object

hashCode
public int hashCode()Returns a hash code for thisDouble
object. The result is the exclusive OR of the two halves of thelong
integer bit representation, exactly as produced by the methoddoubleToLongBits(double)
, of the primitivedouble
value represented by thisDouble
object. That is, the hash code is the value of the expression:(int)(v^(v>>>32))
v
is defined by:long v = Double.doubleToLongBits(this.doubleValue());

hashCode
public static int hashCode(double value) Returns a hash code for adouble
value; compatible withDouble.hashCode()
. Parameters:
value
 the value to hash Returns:
 a hash code value for a
double
value.  Since:
 1.8

equals
Compares this object against the specified object. The result istrue
if and only if the argument is notnull
and is aDouble
object that represents adouble
that has the same value as thedouble
represented by this object. For this purpose, twodouble
values are considered to be the same if and only if the methoddoubleToLongBits(double)
returns the identicallong
value when applied to each. Overrides:
equals
in classObject
 API Note:
 This method is defined in terms of
doubleToLongBits(double)
rather than the==
operator ondouble
values since the==
operator does not define an equivalence relation and to satisfy the equals contract an equivalence relation must be implemented; see this discussion for details of floatingpoint equality and equivalence.  Parameters:
obj
 the reference object with which to compare. Returns:
true
if this object is the same as the obj argument;false
otherwise. See Java Language Specification:

15.21.1 Numerical Equality Operators == and !=
 See Also:

doubleToLongBits
public static long doubleToLongBits(double value) Returns a representation of the specified floatingpoint value according to the IEEE 754 floatingpoint "double format" bit layout.Bit 63 (the bit that is selected by the mask
0x8000000000000000L
) represents the sign of the floatingpoint number. Bits 6252 (the bits that are selected by the mask0x7ff0000000000000L
) represent the exponent. Bits 510 (the bits that are selected by the mask0x000fffffffffffffL
) represent the significand (sometimes called the mantissa) of the floatingpoint number.If the argument is positive infinity, the result is
0x7ff0000000000000L
.If the argument is negative infinity, the result is
0xfff0000000000000L
.If the argument is NaN, the result is
0x7ff8000000000000L
.In all cases, the result is a
long
integer that, when given to thelongBitsToDouble(long)
method, will produce a floatingpoint value the same as the argument todoubleToLongBits
(except all NaN values are collapsed to a single "canonical" NaN value). Parameters:
value
 adouble
precision floatingpoint number. Returns:
 the bits that represent the floatingpoint number.

doubleToRawLongBits
public static long doubleToRawLongBits(double value) Returns a representation of the specified floatingpoint value according to the IEEE 754 floatingpoint "double format" bit layout, preserving NotaNumber (NaN) values.Bit 63 (the bit that is selected by the mask
0x8000000000000000L
) represents the sign of the floatingpoint number. Bits 6252 (the bits that are selected by the mask0x7ff0000000000000L
) represent the exponent. Bits 510 (the bits that are selected by the mask0x000fffffffffffffL
) represent the significand (sometimes called the mantissa) of the floatingpoint number.If the argument is positive infinity, the result is
0x7ff0000000000000L
.If the argument is negative infinity, the result is
0xfff0000000000000L
.If the argument is NaN, the result is the
long
integer representing the actual NaN value. Unlike thedoubleToLongBits
method,doubleToRawLongBits
does not collapse all the bit patterns encoding a NaN to a single "canonical" NaN value.In all cases, the result is a
long
integer that, when given to thelongBitsToDouble(long)
method, will produce a floatingpoint value the same as the argument todoubleToRawLongBits
. Parameters:
value
 adouble
precision floatingpoint number. Returns:
 the bits that represent the floatingpoint number.
 Since:
 1.3

longBitsToDouble
public static double longBitsToDouble(long bits) Returns thedouble
value corresponding to a given bit representation. The argument is considered to be a representation of a floatingpoint value according to the IEEE 754 floatingpoint "double format" bit layout.If the argument is
0x7ff0000000000000L
, the result is positive infinity.If the argument is
0xfff0000000000000L
, the result is negative infinity.If the argument is any value in the range
0x7ff0000000000001L
through0x7fffffffffffffffL
or in the range0xfff0000000000001L
through0xffffffffffffffffL
, the result is a NaN. No IEEE 754 floatingpoint operation provided by Java can distinguish between two NaN values of the same type with different bit patterns. Distinct values of NaN are only distinguishable by use of theDouble.doubleToRawLongBits
method.In all other cases, let s, e, and m be three values that can be computed from the argument:
Then the floatingpoint result equals the value of the mathematical expression s·m·2^{e1075}.int s = ((bits >> 63) == 0) ? 1 : 1; int e = (int)((bits >> 52) & 0x7ffL); long m = (e == 0) ? (bits & 0xfffffffffffffL) << 1 : (bits & 0xfffffffffffffL)  0x10000000000000L;
Note that this method may not be able to return a
double
NaN with exactly same bit pattern as thelong
argument. IEEE 754 distinguishes between two kinds of NaNs, quiet NaNs and signaling NaNs. The differences between the two kinds of NaN are generally not visible in Java. Arithmetic operations on signaling NaNs turn them into quiet NaNs with a different, but often similar, bit pattern. However, on some processors merely copying a signaling NaN also performs that conversion. In particular, copying a signaling NaN to return it to the calling method may perform this conversion. SolongBitsToDouble
may not be able to return adouble
with a signaling NaN bit pattern. Consequently, for somelong
values,doubleToRawLongBits(longBitsToDouble(start))
may not equalstart
. Moreover, which particular bit patterns represent signaling NaNs is platform dependent; although all NaN bit patterns, quiet or signaling, must be in the NaN range identified above. Parameters:
bits
 anylong
integer. Returns:
 the
double
floatingpoint value with the same bit pattern.

compareTo
Compares twoDouble
objects numerically. This method imposes a total order onDouble
objects with two differences compared to the incomplete order defined by the Java language numerical comparison operators (<, <=, ==, >=, >
) ondouble
values. A NaN is unordered with respect to other
values and unequal to itself under the comparison
operators. This method chooses to define
Double.NaN
to be equal to itself and greater than all otherdouble
values (includingDouble.POSITIVE_INFINITY
).  Positive zero and negative zero compare equal
numerically, but are distinct and distinguishable values.
This method chooses to define positive zero (
+0.0d
), to be greater than negative zero (0.0d
).
Double
objects imposed by this method is consistent with equals; see this discussion for details of floatingpoint comparison and ordering. Specified by:
compareTo
in interfaceComparable<Double>
 Parameters:
anotherDouble
 theDouble
to be compared. Returns:
 the value
0
ifanotherDouble
is numerically equal to thisDouble
; a value less than0
if thisDouble
is numerically less thananotherDouble
; and a value greater than0
if thisDouble
is numerically greater thananotherDouble
.  See Java Language Specification:

15.20.1 Numerical Comparison Operators
<
,<=
,>
, and>=
 Since:
 1.2
 A NaN is unordered with respect to other
values and unequal to itself under the comparison
operators. This method chooses to define

compare
public static int compare(double d1, double d2) Compares the two specifieddouble
values. The sign of the integer value returned is the same as that of the integer that would be returned by the call:new Double(d1).compareTo(new Double(d2))
 Parameters:
d1
 the firstdouble
to compared2
 the seconddouble
to compare Returns:
 the value
0
ifd1
is numerically equal tod2
; a value less than0
ifd1
is numerically less thand2
; and a value greater than0
ifd1
is numerically greater thand2
.  Since:
 1.4

sum
public static double sum(double a, double b) Adds twodouble
values together as per the + operator. Parameters:
a
 the first operandb
 the second operand Returns:
 the sum of
a
andb
 See Java Language Specification:

4.2.4 FloatingPoint Operations
 Since:
 1.8
 See Also:

max
public static double max(double a, double b) Returns the greater of twodouble
values as if by callingMath.max
. Parameters:
a
 the first operandb
 the second operand Returns:
 the greater of
a
andb
 Since:
 1.8
 See Also:

min
public static double min(double a, double b) Returns the smaller of twodouble
values as if by callingMath.min
. Parameters:
a
 the first operandb
 the second operand Returns:
 the smaller of
a
andb
.  Since:
 1.8
 See Also:

describeConstable
Returns anOptional
containing the nominal descriptor for this instance, which is the instance itself. Specified by:
describeConstable
in interfaceConstable
 Returns:
 an
Optional
describing the Double instance  Since:
 12

resolveConstantDesc
Resolves this instance as aConstantDesc
, the result of which is the instance itself. Specified by:
resolveConstantDesc
in interfaceConstantDesc
 Parameters:
lookup
 ignored Returns:
 the Double instance
 Since:
 12
